192.168.2.1 Admin Login Details

192.168.2.1 IP Address

To access the admin page type 192.168.2.1 into your web browser’s address bar or click on the link below.

login

Detected IP Address

Local IP Address: 192.168.2.1

Admin Router Login 192.168.2.1

This should be your router admin ip address, depending on your local ip address. This is only the case if your wifi router is on the same network.

Admin

Default logins for 192.168.2.1

IP Address: 192.168.2.1
Username: admin
Password 1234
IP Address: 192.168.2.1
Username: admin
Password admin
IP Address: 192.168.2.1
Username: root
Password 1234
IP Address: 192.168.2.1
Username: admin
Password -
IP Address: 192.168.2.1
Username: admin
Password epicrouter

IP address 192.168.2.1 is the default access point for numerous household broadband routers. These contain several SMC & Belkin models. While initially sold, IP addresses or access points are set on devices by models & brands. But, you may configure any computer or router on a local network to alter these specifications.

192.168.2.1 IP Address login steps

  1. When your router uses 192.168.2.1 & you wish to login to the router’s console. For achieving that, use the local network by indicating a Web browser into http://192.168.2.1/.
  2. Once the connection is founded, the user will be encouraged to present an administrator password & username so as to finish the login procedure. The browser will reply with an error message, if, the router gets separated from network (offline): ‘This webpage is unavailable’.
  3. Few Internet service providers might provide networking equipment which allows administrators to write a name in the browser rather than the IP address.

Troubleshooting while using 192.168.2.1

  1. As 192.168.2.1 is a remote IPv4 network address, you cannot use it for linking to a router from external your house network. For that reason, you need to use the router’s public IP address.
  2. If you require setting up 2 routers on your house network at once, these need to be set up with unique addresses.
  3. To check the address a local router uses, you may search the default gateway currently set on a device linked to it. Otherwise check out the tutorial on how to verify the router’s IP address.

Get connected

You may customize & configure your router’s specifications (passwords, IP,) within the Admin Console. The router Administrative Console offers choices to alter the default local address together with new IP settings.

Conclusion

To access your modem’s administration panel, you just manually write on the browser address bar the duplicate IP. If you are using the incorrect password, you require resetting the device. This may be done by press on the reset key at the rear of your device for few seconds.