Router Alice Default Login - Username, Password and IP Address

Detected IP Address For Alice

192.168.1.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Alice router

Steps to Login to an Alice Router & Access Setup Page

The control panel for your router Alice router web interface is where all the settings are stored & modified. You’ll have to login to the Alice router for performing amends to your network.

Alice router

Either by way of LAN-cable or out of Wi-Fi accesses the network

You clearly have a web browser

Follow the advices to connect to interface of your Alice router for configuration & diagnostics.

  1. Confirm you have connected to the Alice router

To know how to reach the setup webpages of your Alice router, you'll have to be attached to the network.

  1. Navigate to 192.168.1.1 with the help of your web browser

Visit the browser & write the router's IP address in the address box. The most used IP in Alice routers is: 192.168.1.1. You should look for the default list of Alice IP address for your exact model if this IP address isn’t working.

  1. for your Alice router input the username as well as password

Inputs the present username & password now push enter / log in the username and password box.

What to do if your router stops working after changing configuration

Troubleshooting Alice router

If you're unsure on the user/password you go through the default Alice IDs to understand what the defaults are, and way to reset to them.- The authorizations may also be written on the back of label on your router. So now you can configure anything you would like on the gadget.

Get connected

After you login into the Alice admin interface you can modify any settings which are available.

Don’t break the network take care you configure your router.

Tip: previous to modifying anything note down your recent settings so that you can go back it in case of difficulty. If the Alice network or router halts working after change in configuration. Whether or not accidentally make few changes that break the Alice home network, by adhere to the trick 30 30 30 generic reset you can anytime revisit to zero.

Conclusion

Mostly this is the ultimate resort, and if you even now get access to the Alice interface, you may always login to attempt & first revert the settings. Of course this assumes you have noted down the previous value prior altering it.

Models using Alice