Admin Login Details IP Address

To access the admin page type into your web browser’s address bar or click on the link below.


Detected IP Address

Local IP Address:

Admin Router Login

This should be your router admin ip address, depending on your local ip address. This is only the case if your wifi router is on the same network.


Default logins for

IP Address:
Username: admin
Password admin
IP Address:
Username: 'randomly generated'
Password admin
IP Address:
Username: admin
Password -
IP Address:
Username: -
Password admin
IP Address:
Username: admin
Password airlive

No matter what network you access the internet from, you have an IP address. This displays your location, and it is unique for each device. IP addresses form a different address which supports exchange of data between your machine and the rest of the world through the internet. Each machine online connected has one. It operates similarly to our exclusive mailing address, correspondence address, or mobile number which all of us use to connect with other individuals around the globe.

Login Steps

  1. Foremost, open the browser and enter the IP address. If it results in a blank screen, then you need replacing it with Don’t use www.
  2. Next, the default password & username are normally 'username' & 'password.' It is fixed to safeguard effortless first login. But few firms such as D-Link don’t do. Write them & retrieve your administrative console.
  3. Thirdly, replacing the default username & password with your routine ones. This step is necessary for safety purposes. After you get access to admin panel of the router, you will be capable of doing what you want, & arrange the advanced settings as you want!


Make certain you connect properly the router to your PC or other devices through WiFi or Ethernet. If the connections are safe, restart the devices linked to the router. Try to unplug the modem & router. After a few moments re-plug it prior to checking again wait for two minutes.

Repeat after stopping the firewall, if it is switched on.

If all this doesn’t work, try factory resetting the router by pushing the reset key on the router.

Get Connected

Initially, confirm whether the internet connection works directly by connecting to the ISP/Ethernet cable to your computer or laptop.

Secondly, unbox the router & set up the user manual/guide together with the router. The handbook must have the username as well as password for the default IP address.


Just connect to the router to the power supply and allow booting. It will take few seconds. When it’s ready to be used a green light must blink. Fourthly, link the broadband/ Ethernet/ ISP DSL modem/ gateway cable to the router.