Router D-link Default Login - Username, Password and IP Address

Detected IP Address For D-link

192.168.0.1 Login Admin
192.168.1.1 Login Admin
192.168.10.1 Login Admin
192.168.0.50 Login Admin
192.168.0.10 Login Admin
192.168.1.254 Login Admin
192.168.15.1 Login Admin
192.168.8.254 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access D-link router

A high-speed connection is what every user craves for nowadays. A Dlink router provides a high quality and efficient route services needed all around the world. These services can be accessed when you can log in to the web interface. The user manual can help you in this but yet, this short guide can serve the same very quickly.

D-link login process

The Dlink router can service swiftly when the security settings of it are altered from time to time. A user can access the web interface of the router by following the below steps.

  1. Connect your Dlink router with the computer device using a wired medium. You can also use a wireless connection but an Ethernet cable connection is recommended.
  2. Navigate to your router’s default IP to reach the login user interface using an available web browser.

The default IP address for a Dlink router is listed below.

  1. 192.168.0.1
  2. 192.168.1.1
  3. 192.168.10.1
  4. 192.168.0.10
  5. Enter the default user credentials at the login page and hit the Enter key.

The default username and password that a new user can use in stated below.

Username: admin, user

Password: admin, password, user, telus

  1. A successful login will guide you to the control setup page of your router with default settings saved.

Note: You will now be able to modify the settings of your router. But always keep in mind to take a note of all the default settings well before making changes to them.

 

What to do if your router stops working after changing configuration

Troubleshooting your router

If you suddenly lose the connection bond between the router and your device as soon as you make the changes in the settings, then you can reconnect by resetting the router to its default settings. Press the reset key on the router’s backside for around 30 seconds.

Following this might terminate the connection sometimes hence you must choose to reset the router only as a final solution.

Note: You must revert the previously noted default settings to resolve any router related issues when the router’s admin panel can be accessed.

Get Connected

To personalize your Dlink router settings, you require a valid IP address to locate the web user interface. Every router has a brand label on its bottom or backside with the login credentials required to access the router’s services. Use those details at first and if the router misses the tag with valid details then you can use the above-mentioned values.

Conclusion

Updating the router’s login details is recommended regularly so that the network is kept protected with any kind of potential risk to it. You can take the help of this small guide or any individual on how to change the default details.

Models using D-link

Most Popular Router Brands