Router Tenda Default Login - Username, Password and IP Address

Detected IP Address For Tenda

192.168.0.1 Login Admin
192.168.2.1 Login Admin
192.168.1.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Tenda router

Equipped with world-class technology and offering a simplified installation and less expensive networking solutions, a Tenda router realizes the intelligent life of its users. For a better network experience, every Tenda router user must access the web interface of the control panel. Essentials to such as access are an IP address and Username/Password, presented under the user guidebook.

Login Steps

Step 1: Unite your router with a laptop/Smartphone over a wired media. You can also use the Wi-Fi link with your router when the password is known.

Step 2: Open a web browser (Chrome, Firefox, or Internet Explorer) to navigate towards the admin sign-up page.

Step 3: Type the default IP address as 192.168.0.1 in the address bar of it and hit the enter key to proceed further. Try several other default gateways, as stated below.

  1. a) 168.1.1
  2. b) 168.2.1
  3. c) 168.0.254
  4. d) http://tendaextender.net

Step 4: Mention the presented username and passwords under the blank fields on the screen. Your default username and the default password is admin.

Step 5: When presented a screen to set your login credentials, submit a random value.

Step 6: You will see the admin panel of your Tenda router with its default settings saved.

Note: Before changing the configuration, jot down all the factory defaults for your future references.

What to do if your router stops working after changing configuration

Troubleshooting

When unintentionally, you are unable to log in to the admin console, then you might require a reset to be functioned. Follow the below steps to finish the task and then use the default credentials to log in again.

  1. Press the reset button for more than 15-20 seconds.
  2. Turn the router Off and perform step 1 again.
  3. When the LEDs start to blink quickly, your reset operation finishes.
  4. Turn your router Off and On.

Getting Connected

A correct set of IP and Username/Password is required if you wish to transform the security settings of your router. Unaware of how and where to locate this data? Your router has a tag on its bottom edge with every possible required detail.

Conclusion

Your Tenda router offers a point-to-point communication link between two devices across the globe. To obtain a secure and faster service, you must find ways to protect your network. Assistance to which is under the user manual always, however, you can also seek expert advice when needed.