Router Allied Telesyn Default Login - Username, Password and IP Address

Detected IP Address For Allied Telesyn Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Allied Telesyn router

A router is a tool in your network that’s joined amongst all of your internal network tools & your ISP. Routers are dependable for a large part of the network security. They are a very vital part of your residence or official network as they pass all of the data in & out of the network, and connecting frequently to your wireless tools.

Steps to Login to an Allied Telesyn & Accessing Setup Page

For your Allied Telesyn router the control panel web interface is the place where settings are stored & reformed. You need to login to the Allied Telesyn for implementing modifies to the network.

Allied Telesyn router

Whichever way by LAN-cable or by Wi-Fi accessing the network

You already have a web browser

Stick to the instructions for connecting to interface of the Allied Telesyn router to configure & diagnostics.

  1. Ensure you have attached to the Allied Telesyn router

You will have to be fixed to the network to identify how to go to the setup webpages of the Allied Telesyn router.

  1. By means of the web browser navigating to

Go to the browser & in the address field write the IP address of the router. In Allied Telesyn router the most used IP is: Simply looking for the default list of Allied Telesyn IP address for your accurate model if this IP address does not work.

  1. In Allied Telesyn router enter the username/password

Keying the existing username/password simply click on enter / login the username/password field.

What to do if your router stops working after changing configuration

Troubleshooting your Allied Telesyn router

As soon as you login to the Allied Telesyn admin interface now amend any available settings.

Avoid breaking the network make certain you configure the router.

Before you modify anything jot down your existing settings so that you may revert it in case of complicatedness. If the Allied Telesyn network or router pauses to operate after changes in configuration.

Getting connected

Accidentally if making few amendments that breaks the Allied Telesyn network, by adhering to the generic reset secret 30 30 30 you may revisit to zero anytime.


Normally this is the final remedy, and if you still get access to the Allied Telesyn interface you should always login to bid & firstly revert to the settings. Certainly this assures that you’ve written down the former value prior amending it.

Models using Allied Telesyn