Router Altice Labs Default Login - Username, Password and IP Address

Detected IP Address For Altice Labs Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Altice Labs router

To attain access to all Altice Labs routers, you require the router IP, the username & password of router. You will obtain this information in manuals of router Altice Labs. However if you don’t have the manual for the router or you don’t wish reading the full guide to retrieve the default login data then you may employ the below quick manual.

Login Guide Altice Labs Router

  1. The initial step is to open the internet browser with Chrome, Internet Explorer, Opera or Firefox.
  2. You will notice two text boxes where you will input a username & password.
  3. Verify the foot of the router. Here you may notice your login diplomas. Otherwise have a glance at the router manual.
  4. Input the username/password, strike "Enter" & now you will see the control panel of the router.

What to do if your router stops working after changing configuration

Nothing of the above techniques worked for me

  1. All you require doing is to reset the modem. This can be easily done by click on the button reset at the bottom or back of the router.
  2. If for almost 20 secs with the help of a toothpick you push this tiny button, then the modem getting restored to factory reset. Simply remember that if you reset the modem, you will be unable to find your onscreen connection.
  3. In this regard it is better to take the advice of an expert. But if don’t have plenty of information, it is clearly advocated that you ought to take help from somebody who has got understanding on this subject.

Get connected

To your PC connect the cable with the router. If you require, you may use the wireless network as a substitute alternative. Recommended if you use Altice Labs router, use an online connection. This rejects the hazard of speedily losing the session whereas making settings alterations. Now go to the router’s admin panel & complete the router’s default user name as well as password in the required fields. If you are not aware on user name or password, it is recommended that you use any of the default passwords in Altice Labs routers.


If you have struggle to login to the router, you are undoubtedly filling the erroneous user name & password. After substituting both, make sure you note them down so you do not have difficulty to remember them.


Models using Altice Labs