Detected IP Address For Anker
| 192.168.0.1 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access Anker router
The control panel of the Anker router web interface is where all the settings are saved & amended. To perform variations to the network you must login to the Anker router. Conditions to open the Anker web interface. To open the Anker web interface is rather uncomplicated & all you'll want is an Anker router. Enter the network, by LAN-wire or by Wi-Fi. Also you must have a web browser.
Login steps
- To know how to access the setup webpages of the Anker router, you must be link up to its network. Take care you are joined to the Anker router. Therefore either with the Wi-Fi or with the Ethernet cord initiate by joining into the network.
- Enter the web browser by navigating into 192.168.0.1
In Anker routers the most universal IP is 192.168.0.1. For your particular model if that IP address is not working. Simply hunt the default IP address list of Anker router. Access the browser by typing the IP address of router in the address bar. Capture the IP into the address bar & strike go
- Submit the user name & passkey for the Anker router. Submit your recent user name and passkey in login IDs section, & strike enter to login.
What to do if your router stops working after changing configuration
What if the Anker router or network stops working?
Whether or not by mistake make a few modifications which breaks the Anker home network, you should return to zero by doing the universal 30 30 30 difficult reset technique. This is mostly the last trick, & still if you can access the Anker interface you must try to always login & revert to settings initially. Ensure that you have noted the new IDs somewhere.
Getting connected
After login, a lot of settings can be controlled like changing the IDs, modifying the default login details. Keep in mind to examine the settings cautiously prior striking on save knob and if you cannot discover any solution to any trouble. It is advised that you must call the manufacturer.
Conclusion
If the router encounters any working issues or not reacting to any type of reason then you should reset the router. But initially, you must try switch on/off the router if it is not working & opt for reset. To reset the Anker router just follow the easy resetting steps. This will help you to login to the router.