Router ASRock Default Login - Username, Password and IP Address

Detected IP Address For ASRock Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access ASRock router

Stability, coverage & Speed are the router basics, but to make one appealing is the tough part. ASRock Router is prepared with 4 internal high-performance antennas, advising a conjoined speed of 2.53Gbps. Besides, with the ASRock router, you may also remotely control the home appliances, or retrieve storage devices for instance pen drives that have been plugged in without any complicated configurations.

Steps to login ASRock Wireless Router

To login to the ASRock Wireless Router & adjust the settings, you should follow below steps:

  1. Confirm you are fixed to the network of the router, with Wi-Fi otherwise ethernet line.
  2. Visit the browser & enter You will be persuaded by a login dialogue.
  3. Write the password as well as username: admin. If already the password has changed use that as a substitute.
  4. You can now be able to login. If you have not yet modified the default passwords, it is advised to first change it & after that login.

What to do if your router stops working after changing configuration

Troubleshooting ASRock Wireless Router

You must perform a factory reset to get the default settings If such advices do not work for your router. Check few other usual ASRock authorizations, as they can normally be shared throughout brands/variants. If your router does not work as it should, connection dropping or not being approachable, you must firstly perform a reset to see if the router troubles continue. Other circumstances where you may require resetting the router is if you have disremembered the passkey or misconfigured it & will not get access any longer.

Get connected

Although for this model there are no special instructions, however you can always perform the reset 30-30-30 trick. Hold the reset key and press for 30 secs after router is switched on with the help of a toothpick or paper clip for 30 secs. As still pressing the reset key, put on the power again & press for 30 more seconds. This method mostly works to reset any router.


If you wish to get more thorough information on resetting the router you should read the router's user instruction booklet. You may be able to obtain it in the main router list. Notice your router in the main list, press on it, now hit on the guide link. It will specifically guide you on how to reset your router.

Models using ASRock