Detected IP Address For AT T
| 192.168.1.1 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access AT T router
AT&T has been continuously offering quality service for its phone & internet users. Accessing the AT&T router login may guide you go to the router web’s interface. This is when you may modify few basic/ higher settings & configure passwords/usernames.
Way to login to AT&T Router
Step 1. Login into the router is easy & simple. However, earlier you proceed, you want to verify if your modem is presently powered on. Now, you might now abide by the step-by-step below guidelines.
Step 2. Next, connect the PC to the internet. The link m be via a LAN or wireless network.
Step 3. Go to the browser & typing 192.168.1.254 in the address box. Push Enter to go on to the AT&T router login page.
Step 3. You will be taken to the login homepage. From here, input the usernames & passwords. If you have yet not modified the default settings, insert admin for usernames. Hunt for a label at the side of the modem & record the variables almost “System Passwords” or “Gadget System Codes”.
Step 4. If the password is necessitated & none could be found on the router, try departing the homepage blank. If this does not work call AT&T.
Step 5. After done, you will notice the web interface of router & retrieve the settings.
What to do if your router stops working after changing configuration
Troubleshooting AT&T Router
Your modem arrives with the default passwords & usernames. But, not transforming it might uncover you to viable hacking & few security troubles. Hence, it is always sensible to modify these two. Just take a glance on way to modify the default ATT router login data.
Get connected
- Login into the AT&T router to enter the web’s interface.
- Then, visit the Settings tab & prefer LAN > Wi-Fi.
- Scrolling down till you notice User Network.
- For changing the router’s username, hit on the box beside Networks Name (SSID) & record your chosen username. And for the passkey, verify Using Routine Wi-Fi Network Passkey & set the program as you want.
- Hit on the Save key to do the modifications you’ve done.
Conclusions
There are several cases wherein you’ll want to reset the modem. It could be since you forgot the password & cannot login to the router web interface. Or possibly, your mechanic recommends you to do so. No matter why here’s a fast manual. For any more issues about the AT&T router login, you should simply put a message on their forum website or call the client support.