Router Autonet Default Login - Username, Password and IP Address

Detected IP Address For Autonet

192.168.1.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Autonet router

Autonet has constantly been imparting quality service for its cell phone & internet customers. U-Verse is one such example. This grants their users to have television cord, telephonic link, & internet sourcing just one router. Get into the Autonet router login aids you in opening the web interface of router. Here you might amend the advanced/basic settings & password/username configuration. 

Autonet Router Login steps

To login to the Autonet Router simply follow below directions.

  1. Hook up the cord from the router to your desktop. You might use the wireless networks as an alternate choice if you want.
  2. If you are working with an Autonet router, it is proposed to use an online connection. This excludes the probability of losing your meeting suddenly when doing settings transforms.
  3. Then go to the router’s admin control & enter the router’s default client password as well as name in the required fields. If by chance you don’t recall the password & username, it is suggested you try some of the default password in Autonet routers.

What to do if your router stops working after changing configuration

Autonet Routers troubleshooting

If you have complication to login into the router, you are almost certainly entering the inappropriate login dada. After transforming both, it is advised that you note it somewhere so that you don’t face distress recalling them.

Forgotten the password? You should settle this concern by not resetting the login information of router. To reset the router, hit on the back of the router there is a small black key for about 20 seconds. This can restore the router to the factory defaults.

Get connected

Observe the Reset knob on the modem usually which is posited besides the Power port.  Then, take a pointed thing like pen, toothpick or paper clip & push the button. Press for 20 seconds & release it. If you Release the button prior the pause of 20 seconds will only do modem reboot but it won’t reset. Wait till the modem start again & all lights get on.

Conclusion

Customers might encounter nuisances with loading time on homepages or crashing to attain the speed they ought to access. This is since the network uses a special IP address. In this event, you should first try reading the IP address router list & retrieve the correct address for your router.