Router Axesstel Default Login - Username, Password and IP Address

Detected IP Address For Axesstel

192.168.0.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Axesstel router

An Axesstel router stands out to be an ideal router in providing all the solutions to home and office networks. A user is also provided with the user manual with the router that contains all the information about your router in it. To reach the web user interface of any Axesstel router we require an IP and Username/Password to login. The below small guide can help with such a process.

Login process of Axesstel router

To connect to the router, your device needs to be connected to it first. So, get your computer connected to the router using a wireless or wired network.

Note: A wired connection is recommended so that router does not end the connection between due to any power reasons.

Now follow the below steps to access the Axesstel router.

  1. Open a web browser such as Chrome, Firefox, or Internet Explorer (Whichever is available).
  2. Now type the IP 192.168.1.1 in the address bar of the browser and click Enter key.

The default IP for an Axesstel router is 192.168.1.1 or 192.168.0.1. You can use any of these.

  1. A user interface asking the login credentials will open.

Specify the Username and Password that is set by you previously or use the default username and password as admin to login.

  1. You will be directed to the web page of the control panel for your router with all the default settings stored.

You can now make changes in the setting but also write all the default setting values with you before making any adjustments to them.

What to do if your router stops working after changing configuration

Axesstel router troubleshooting

If the login credentials are unable to grant the login access, then the only way to recover your services is by resetting the router. Pressing the reset key present at the router’s base for 30 seconds will set the router to its default.

Your internet connection may get interrupted after doing this. Consequently, you must maintain a previous record of default settings with you.

Get Connected

A correct IP address and Username/Password combination are required to access the router services. But, if a user is unable to recall them, then use the details mentioned on the router’s backside or at its base for login. You can try to contact the router manufacturer or get the user manual for this as well.

Conclusion

When you have the login access to your router, then, find a way to revert the settings with the default values first. Resetting should be the last resort. You can also seek help from a knowledgeable person.

Models using Axesstel