Router CastleNet Default Login - Username, Password and IP Address

Detected IP Address For CastleNet

192.168.1.1 Login Admin
192.168.0.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access CastleNet router

 A digital life with higher efficiency and greater convenience is what a CastleNet router aims in providing. These features can be achieved with two important details such as an IP address and username/password.

The user guide is where this can be found, but, if you have not received the guide or do not wish to look through, use the quick guide below for your help.

Login process of CastleNet router

A successful connection is what you must achieve with your computer/laptop to access the CastleNet router services.

After the connection is established, then follow the below steps to get the login interface.

  1. Chose a web browser available (Chrome, Firefox, or Internet Explorer) and open it.
  2. State the IP 192.168.1.1 in the address bar of the web browser.

The default IP address of a CastleNet router can be used as 192.168.1.1. Or you can try to get the correct IP for your router’s model online.

  1. Specify the Username and Password on the login page.

Type in the username and password to login. If you do not have them with you or if you are a first time user, then use the default values. The default username and password is admin.

  1. Your routers control panel will be opened where all the defaults are stored. You can now modify them according to your needs.

Recommendation: you must document the default settings well in advance before changing them for future usage.

What to do if your router stops working after changing configuration

CastleNet router defaults list

Every router has its IP address used as a default gateway. This IP can be easily found on the router’s bottom or backside mentioned but the below list can also be checked for some commonly used IPs.

  1. 192.168.1.1
  2. 192.168.0.1
  3. 192.168.10.1
  4. 192.168.3.1
  5. 192.168.20.1

CastleNet router troubleshooting

When even trying all the above-stated process, log in to the router control panel is not granted, then you must check the username and password used. If you have forgotten the correct credentials, then you can reset the router to get the defaults back.

A reset can be performed by pressing and holding the reset button for 30 seconds.

This might end the network link. Hence, always keep a record of the default settings before amending any changes in it.

Conclusion

To reset the router must be the last alternative. However, you must try to log in and reset the default settings with what you have mentioned earlier.