Detected IP Address For DDWRT Router
| 192.168.0.1 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access DDWRT Router router
A DD-WRT emphasis on providing a large number of functionalities to its users with an easy and efficient network handling capabilities. A simplified and secured working of your router can be achieved with a successful login into the web page of it. Such a thing requires an IP address and user IDs to locate the login user interface.
Login steps for your DD-WRT router
For an easy and effortless login to the router’s admin panel, there are some prerequisites such as a DD-WRT router, a computer/laptop and a web browser installed.
Step 1: the first step is to set up a wired or wireless connection. We recommend having a wired connection to make the connection last a longer time.
Step 2: Now, trace a path towards the login web page for your router by providing the default IP 192.168.0.1 in the address bar of a browser.
Step 3: When your router gateway leads you to the login page, specify the user credentials. When you have changed the username/password before, then use them to log in or else check your router’s base for the default data. Bellow mentioned most common user credentials can also be used.
Username: root
Password: admin
Step 4: After a successful login, you will be guided to your DD-WRT router’s admin panel where you can alter the settings to make network secure and more functioning.
It is always recommended to take a note of all the previously stored settings before amending any changes to them.
What to do if your router stops working after changing configuration
Troubleshooting your router
When getting into the router’s admin panel becomes a nightmare and the router starts to misbehave, then you can resolve this issue by a simple reset option. Turn on and off your router and then try to login again. However, if the problem persists, find and push the reset button on the router with a toothpick or a pin for 10-15 seconds. This usually will return the router to the factory-set values.
Get Connected
With a correct set of login passkey and IP, a seamless connection between all the network devices can be established. The user manual and the router itself has all the required information or else state the above-mentioned details. Although, if you do not find any help with provided details, the seek help from the brand manufacturer.
Conclusion
Every user must find ways to retain their login access and their network safe from any trespassers. A wise decision would be to take help from the above guide or any individual whenever needed.