Detected IP Address For Dray Tek
| 192.168.1.1 | Login Admin |
| 192.168.0.1 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access Dray Tek router
A Dray Tek router is the one which offers its users with some high-end features such as a better firewall, a high-integrating, and quality network services. Such can be only accessed with a login grant to the router’s admin panel and that requires a valid IP and Username/Password combo. This brief guide would help in gaining login access.
Dray Tek login process
In order to look and modify the router’s security and other settings, a user needs to log in to the router’s admin panel. The below stated steps will guide us through this.
- Get your computer and router connected either with a wired or wireless medium.
A wired Ethernet connection is suggested so that the connection is not interrupted while accessing the settings.
- Now, choose a web browser of your choice and navigate to the IP 192.168.1.1 by stating it in the address bar of it.
You can also use another default IP 192.168.0.1 if the above-mentioned IP does not work.
- You will see the login interface of your router. Mention the username and password which you have.
The default username and password that a fresh new user can use in stated below. If you have already changed the credentials before, then use them.
Username: admin
Password: admin
- A successful login will guide you to the control setup page of your router with default settings saved.
You will now have the right to present any modifications to the settings of your router. But always keep in mind to take a note of all the default settings well before making changes to them.
What to do if your router stops working after changing configuration
Troubleshooting your router
Have you forgotten the login details and the router’s functioning has been affected? Well, this issue can be resolved very easily by resetting the router and reset all the default settings back.
Find the reset key at the base of your router and press it for about 30 seconds. This will reset the router to its factory default but might disconnect the connection as well sometimes. Hence it is recommended to use the reset option as a final solution.
Note: When the router’s admin panel can be accessed, you must revert the previously noted default settings to resolve any router related issues.
Get Connected
Every router has an IP address which can take you to its login interface and hence provide access to change the security settings. Where to find it? Your router must have a brand label on its base or backside with the correct set of user details along with the IP address. You can use that to locate the router page or use the defaults presented above in this article.
Conclusion
Every router is presented with the default credentials that need to be updated regularly to prevent it from any trespassing. Take help from this manual to do so.