Router Dynalink Default Login - Username, Password and IP Address

Detected IP Address For Dynalink Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Dynalink router

A router must provide its users with high-quality standards such as higher security, higher data speeds, network reliability, etc. and this is what a Dynalink router provides. With the login access to the router’s admin panel, every user can attain such services. An IP address and a Username/Password are required to do so. The below small guide would help in gaining login access.

Dynalink login process

As discussed above, a user needs to log in and hence the router settings can be accessed. The below steps will guide us through this.

  1. Establish a wired connection between the router and the computer. You can use a Wi-Fi connection as well but a wired connection is recommended.
  2. Choose any available web browser and router yourself to the sign-in page of your router by stating the IP in the address bar.
  3. You will see the login interface of your router. Mention the username and password which you have.

A new user can use the default username and password as mentioned below.

Username: admin

Password: admin

  1. After you login successfully, the control setup page will open to you. All the default settings are saved here.

Note: Modifications to the settings of your router can be now done. But always keep in mind to take a note of all the default settings well before making changes to them.

What to do if your router stops working after changing configuration

Troubleshooting your router

If the router is not allowing you to log in to the admin page of it, then you might be entering the wrong credentials. In this case, reset the router to bring it to the factory-set defaults. A simple process to do this is by pressing the reset button on the router for 30 seconds.

This will reset the router to its factory default and now you can log in via default credentials again. But, this might disconnect the connection as well sometimes. Hence it is recommended to use the reset option as a final solution.

Note: When the router’s admin panel can be accessed, you must revert the previously noted default settings to resolve any router related issues.

Get Connected

An IP address is an important data required to locate the security settings of the network. You can try the above-mentioned IP address and if that does not work then look at your router for a brand label on its base or backside with the correct set of user details along with the IP address.


Every router is offered with the default IDs that are required to be updated regularly to prevent it from any trespassing. Take help from this manual to do so.

Models using Dynalink