Detected IP Address For DZS
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access DZS router
Every individual in this world needs a safe and secure connection to the Internet which is what a DZS firm has their focus centred upon. With the router, every user is also equipped with an IP and a right combination of username and password to reach the admin panel. Trace all the required data through the guide book or else below in this article. Admin login is necessary to configure the router.
Login steps for DZS router
A requirement to set up your DZS router is having a computer system and your router turned on and connected (wired or wireless connection).
Step 1: Connect your router cable with the computer. You can alternatively use a Wi-Fi link as well when you know the Wi-Fi password for your router.
Step 2: launch Chrome or Firefox and type the default IP 192.168.1.1 to reach the sign-in user interface.
Step 3: when the DZS router IP leads you to the login interface, enter the username and password further pressing the Enter key to be guided to the control panel interface. You can also state the most familiar user details mentioned below to gain login access.
Username: zhone, admin
Password: admin, zhone
What to do if your router stops working after changing configuration
Troubleshooting the router
Configuring the router is an easy task when you are logged in to the admin page. However, if you are unable to login, then what you can do is reset the router to gain login access. The process is again a simple one where you need to push the reset button on the router’s base using a pin.
Your router will be brought to the initial stage and you can use the default user credentials to log in.
What is required by any device to be connected to the router is an IP address and a well-established wired or Wi-Fi connection. The router is well equipped with all the necessary user credentials that a user can look for any time to be able to locate the admin panel. If required, the router specifications can also be used to trace such data with the manufacturer.
This quick guide provides a simple way to get a connection established and set up a network. However, every DZS router user must update their user passkey to protect the network from any potential damage. When needed, seek help from any individual with knowledge.