Detected IP Address For EDGELESS
| 192.168.16.1 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access EDGELESS router
Every user's life revolves around the online network requirements and a router plays an essential part in it. Services such as high speed and security are what an EDGELESS router provides with the interconnected devices through an IP and user passkeys. But, a user must first log in to the admin panel or the router and for this, the below short manual would be helpful.
Login steps to an EDGELESS router
Login must be granted first to a user to access the admin panel with all the settings to be updated. Follow the below setup to gain the login access.
- Connect your system with the router either through an Ethernet cable or Wi-Fi. However, a wired connection must be preferred.
- Now use the IP 192.168.16.1 to navigate to the Sign-in page using a web browser.
- When you get to the router's login page, mention the username and password available with you.
If you do not know the username and password, then you can log in by using the default credentials stated below or use the router details to get the correct user passkeys.
Username: admin
Password: admin
- Now you will be guided to the admin panel of your router with all the default settings stored and can be modernized as needed.
Note: It is to be kept in mind that all the previously set default details are noted much before making the changes to them.
What to do if your router stops working after changing configuration
Troubleshooting your EDGELESS router
If after making some changes or when you forget the login details, the router's functioning is been affected, then you can restore the default settings simply by resetting the router. A simple method to do that is by pushing the reset key at the backside of the router with a pin or a toothpick for almost 30 seconds.
This will insert all the default settings to your router. However, this should be a final recourse to any router related matter and we must log in to the router's admin panel and set the earlier noted default settings by ourselves for as a solution.
Get Connected
You would require your router's IP address and default user specifications to get to the router's control settings. You can get this data on the router printed on a small tag on its backside or bottom. When the router misses them, use the default credentials presented in this article above.
Conclusion
Your network and data are likely to be attacked if the default settings and user passkeys are not modified. Get yourself some help on how to update them within this manual.