Router Edgewater Networks Default Login - Username, Password and IP Address

Detected IP Address For Edgewater Networks Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Edgewater Networks router

A higher degree of network security and speed along with the finest quality product is what an Edgewater router focuses upon. Its services can be well accessed only when a user gets admitted into the router’s control setup web interface. The quick guide provides us with all the required information about this.

Login steps to an EDGEWATER NETWORKS router

The login access to the router’s admin panel will grant a user to modify all the settings as per the needs. The bellow steps will help in gaining such a privilege.

  1. Get a connection established using a wired cable between the router and the network device. You can even use a wireless connection but it is recommended to have a wired one.
  2. Use the IP to navigate to the router’s Sign-in page using a web browser and stating the default IP in its address bar.
  3. Now, at the login page state the username and password with you.

When you are unaware of the username and passwords to be used then,  you can try the defaults mentioned below to login.

Username: root, default

Password: default, root

  1. You must now be directed to the control panel of your router with all the default settings stored and which can be updated as needed.

Note: It is to be kept in mind that all the previously set default details are noted much before making the changes to them.

What to do if your router stops working after changing configuration

Troubleshooting your EDGEWATER NETWORKS router

When the login credentials you set before has somehow slipped from your mind, and then your router’s function may be affected. But, you can restart the router services by returning the default settings simply by resetting the router. A reset can be performed by pushing the reset key at the backside of the router with a pin or a toothpick for around 30 seconds.

The router’s settings will be set to default after doing this. However, this should be a final resort to any router related issue and we must log in to the router’s admin panel and set the previously noted default settings.

Get Connected

A valid IP and user credentials are needed to locate the router’s control settings and update them. Your router itself has this data on it printed on a small tag on its backside or bottom. When the router misses them, use the default credentials presented in this article above.


To protect your network, a sensible decision would be to modify the user details often. If you are unaware of the process, taking help from the annual is what should be recommended.

Models using Edgewater Networks