Detected IP Address For EDUP
| 192.168.0.1 | Login Admin |
| 192.168.1.254 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access EDUP router
To access an EDUP router, a user would have to first access its web admin panel. Some essentials to gain such access are an IP address to reach the login interface and then a Username/ Password combo. You can look for all such information in the router’s user manual or else continue with this article for all the necessary details.
EDUP router Login steps
- Make a suitable connection between the router and your personal computer. You can for a wired or wireless connection as per your wish.
- Once a connection is formed, en route towards an IP 192.168.0.1 using a web browser such as Chrome. This should guide you to the Sign-in user page.
You can even try another IP 192.168.1.254 if the above-mentioned IP does not take you to the desired page.
- Key in the username and password in the two specified blank fields further clicking the enter button.
If the login credentials have been changed earlier by you, then you must specify the changed values or else you can use the default credentials as listed below.
Username: admin
Password: admin, blank
- A successful login will grant you to access the control panel web interface where you can check and update the settings for your network connection.
Note: We strongly recommend to keep a record of all the default values with you for future use before changing them.
What to do if your router stops working after changing configuration
EDUP router’s Troubleshooting
Router services will be offered only with admin access. Hence remembering the user credentials is a must. Although, if somehow you misplace them and the router does not give access to the admin panel, then you can reset the router to its factory settings and values.
Find and press the reset button on the router for 10-15 seconds and then restart the router to complete the process. Now use the default user credentials this time to log in. But, this should be a final for any router issue.
Get Connected
To amend any system configuration to your EDUP router, some basic quantities are required. An IP is the first followed by a pair of user credentials. Tracking such data is not tricky. Look for a brand label on the bottom of your router with details printed on it or you can trace it down in the user manual.
Conclusion
All your EDUP router related issues can be well sorted with the default settings and values. Hence you must keep a note of your username and password and all the previously saved settings.