Router EMS Default Login - Username, Password and IP Address

Detected IP Address For EMS

192.168.1.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access EMS router

Login steps for your EMC Tech Router

The access to the admin panel of your router will grant all the required permissions to modify the security as well as profile settings with the requirement of an IP and Username/Password combination.

Below steps will guide you with all such necessities.

A computer/laptop/sartphone device.

The EMC router.

An Ethernet cable of a Wi-Fi network connection.

  1. Get a connection established with your EMC Router. We recommend a wired Ethernet connection to set up a stronger bond.
  2. Open the Chrome browser and state the default IP 192.168.1.1 in the address bar of it. This will guide you to the login user page.
  3. Mention the default username and password in the two fields on the login page and proceed with the login process.
  4. Once login is granted, then you will be granted access to the control settings for your router.

Note: Always remember to note down all the preinstalled settings before changing them so that all the future issues can be resolved with them.

What to do if your router stops working after changing configuration

Troubleshooting your router

In case everything fails along with the router login access, then what you need to do is a router reset. Doing this will set all the router values including the user credentials to their default value. At the bottom or backside of your router, a small black push button is provided, which you need to press with a toothpick on any pointed material for 10-20 seconds.

However, when you can access the control settings user interface, simply paste the previously written default values as a solution.

Get Connected

At times, you would be requiring the IP address to reach the router web interface. Don’t know where to find it? Well, your router has a sticker on its back that presents all the necessary required data for a user. But, when missing, you can contact the brand manufacturer to get the desired information.

Conclusion

Defining the router network and its security settings is not a complicated process and must be performed regularly in due time. The user manual or this quick guide can aid your help on how to update the settings.

Models using EMS