Router Enable Network Default Login - Username, Password and IP Address

Detected IP Address For Enable Network

192.168.99.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Enable Network router

A router owns a necessary role in distributing the data for any communication interface and for such a purpose it is also be seen as a hub. An Enable Networks router/device can be login using two primary essentials: IP and Username/Password. This data is ready in the user guide produced with the router. But, if the user has not got the guide or encounters a problem in investigating these details in it, then this little guide will aid the log in issue.

Login access process

Follow the below instructions carefully to log in to your Enable Network router’s admin.

  1. Connect your router’s Ethernet cable to your PC or use a Wi-Fi connection to enter into a network.

Recommendation: For an Enable Network router, it is always recommended to have a wired Ethernet connection so that you may not lose the link while making some changes in the network settings.

  1. Once the connection is set, access the router’s login page by presenting the default IP 192.168.99.1 in the address bar of the web browser (Chrome or Firefox).
  2. Next, mention the username and password of your router to access the admin panel. If you are unaware about the username and passwords to be used, then try one listed below.

Username: admin, root.

Password: admin, root, 1234.

What to do if your router stops working after changing configuration

Troubleshooting the router

If all that is discussed above has failed and you are yet unable to access the control settings of your router, then the final solution for this could be to reset the router. This can be effortlessly performed by using the universal 30 30 30 hard reset mechanism. Your router has a reset pin at its backside.

But, before performing a reset make sure to copy all the default values well in advance so that in any case you can get back to the source settings if required.

Get Connected

When you find difficulty in gaining the login access to your router, then you might be using the incorrect username or password. Hence you must carefully note down all the changes that you make. However, you can locate the default details mentioned on the router’s backside as well.

Conclusion

A user must keep in mind to note all the updates formed into the router at every stage. This is the only way to solve any future problems efficiently. Also, a reset must be your final choice.

Models using Enable Network