Router Hawking Default Login - Username, Password and IP Address

Detected IP Address For Hawking Login Admin Login Admin Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Hawking router

A router is a device that has tremendously transformed our life. A day without the internet is what we cannot imagine hence making the router a necessity today. Your Hawking router provides a customizable user network with a high gain performance with access to the control panel web interface. For accessing the router, aid the below guide.

Login steps

You require some prerequisites to get connected with the router, such as a computer, your Hawking router, and a pre-installed web browser.

Follow the below steps to access the settings page.

  1. Open a browser and type the IP address in the address space to advance to the login page. Below is a list of some commonly preferred IPs.
  2. a) 168.1.254
  3. b) 168.5.200
  4. c) 168.1.1
  5. This gateway will lead you to the login page. Now, enter the username and password in the specified fields. Your Hawking router uses the default credentials for login as:

Username: admin

Password: admin, 1234

  1. When properly executed the whole process, the web interface of the control settings will appear to you.

Always make a quick note of all the factory-set values first and then make any alterations. You must also update the user credentials with an inaccessible value.

What to do if your router stops working after changing configuration

Troubleshooting steps

Your router specified with the default login credentials is at risk. But, if you have changed it previously and do not remember them now, then you can reset the default values by resetting the router. Switch off your router and press the reset button for 20 long seconds continuously. You will find the reset key at the router's back or bottom. However, resetting might end the connection, and hence you must seek professional help.

Although, when you can log in to the router, amend the factory default values with former saved settings.

Get Connected

To connect to the router, you must be connected to it first. So, ensure your router is plugged-in. Next, you must check whether the IP to locate the router's web page is valid or not. You can look at the bottom of your router for a brand tag with the requirements to get connected. Your router's commonly preferred IP address is also present above.


Your router is a hub to your network, which needs to protect all the data transmission within. Look for proper assistance on how to update the settings under the manual or implement the steps presented above.