Router Kozumi Default Login - Username, Password and IP Address

Detected IP Address For Kozumi

192.168.1.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Kozumi router

A quick, easy to install, safe networking and stable router service all are your Kozumi router offerings. Multiple device connection to just one particular network requires an admin entry and setup operation first. Discover your default IP address and Username/Password combinations below here.

Login Process for your Kozumi Router

A user can assist its router’s performance only with the admin panel turn-up. Following the below process will help to gain the login access.

  1. Start a web browser, copy the default URL, and then paste it in the address bar of it from here: http://192.168.1.1.
  2. Your route must respond to this gateway and open the admin login interface. Now, type the default username as admin and Password as admin.
  3. When properly executed, all approved to adjust the settings.

Always make a quick note of all the factory-set values first and then make any alterations. You must also update the user credentials with an inaccessible value.

What to do if your router stops working after changing configuration

When nothing works well

If you have changed the default login credentials previously and do not remember them now, then you can reset the router. Switch off your router and press the reset button for 20 long seconds continuously. You will find the reset key at the back or bottom of your router. However, resetting might end the connection, and hence you must seek professional help.

Although, when you can log in to the router, amend the factory default values with former saved settings.

Get Connected

To connect to the router, you must be connected to it first. So, ensure your router is plugged-in. Then, with the correct set of IP and a Username/Password, a user is allowed to login and update the router’s settings. Look around your router for a label with all the practical details for your router. You can also use the router specs such as name and model to find the details as well.

Conclusion

The default login IDs for your router call for an update regularly to minimize the risk of getting hacked or trespassing. Look for proper assistance on how to update the settings under the manual or implement the steps presented above. Also, keep in mind to replace the defaults manually after logging into the admin but not through reset operation.

 

Models using Kozumi