Detected IP Address For Parker Vison
| 192.168.150.1 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access Parker Vison router
Your Parker Vision router offers a feature called Direct 2 Data that ensures a user continuous service right when you receive the modem. If anyways the router fails with such service within a year, the brand presents a quick replacement or repair option or refund. However, to get connected to the device, IP and Username/Password must be acknowledged.
Parker Vision Login Steps
You can log in and configure your router with your previous Wi-Fi connected device. However, we recommend performing the initial setup with your Parker Vision router connected through an Ethernet cable.
Step 1: Ensure a connection between your router and a personal computer.
Step 2: Launch a web browser such as Google Chrome, Firefox, or Internet Explorer.
Step 3: Key-in the default IP as http://192.168.150.1 in the address field. Your route must respond to this gateway landing on the login web interface.
Step 4: Type 1234 as the default password in the offered field and click on the login button.
When prompted, present the new password with some complex values. Consider storing the same with you for future reference.
Finally, access the control settings and save the default settings as well.
What to do if your router stops working after changing configuration
Troubleshooting
When unintentionally, you forget your login credentials and cannot access the router, then a reset is recommended to load factory settings. Use the reset button on the side panel of your router to execute. However, this might tends to lose your network speed and hence, should be your final resort.
- Press the reset button for more than 15-20 seconds.
- Turn the router Off and perform step 1 again.
- When the LEDs start to blink quickly, your reset operation finishes.
- Turn your router Off and On again.
Note: Use 1234 as your login password to get admin access and reset the profile.
Get Connected
Your parker Vision router offers a point-to-point connection that is secure and fast. A correct set of IP and Username/Password is required if you wish to transform the security settings of your router. Unaware of how and where to locate this data? Your router has a tag on its bottom edge with every possible required detail.
Conclusion
Your Parker Vision router is like a hub for all your internet and data needs at your home or work. So, in this article, we present login ways. For more information, check the router manual.