Router PIXLINK Default Login - Username, Password and IP Address

Detected IP Address For PIXLINK

192.168.1.254 Login Admin
192.168.10.253 Login Admin
192.168.0.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access PIXLINK router

A router has a very crucial role in distributing the data in and out in any communication network. Hence, for that reason can also be considered as a hub station. A PIX-LINK router can be accessed using two basic needs: IP and Username/Password. This data is available in the user guide provided with the router. However, if the user has not received the guide or finds difficulty in looking at these details in it, then this small guide will help serve the log in issue.

Login Steps to your router

Below is the method for getting the login access of any X-Micro router control setup.

  1. Make a connection to the PIX-LINK router to your device, either wired or through a Wi-Fi network.
  2. With the use of any Web Browser, open the IP 192.168.1.254.
  3. A web page with two fields will appear stating Username and Password.
  4. Enter the available Username and password, or use the defaults as "admin" for both the fields and then click on Login.
  5. The control panel of your router where all the settings are stored will appear.

Make the changes according to the requirements from the page that appears.

What to do if your router stops working after changing configuration

Troubleshooting your PIX-LINK Router

Unable to log in to the admin might be due to several reasons, such as using an invalid password or gateway address. Overcoming such issues calls for a factory reset to the router. Find and press the reset button on the router for 10-15 seconds and then restart the router to complete the process. Now use the default user credentials this time to log in. But, this should be a final for any router issue.

Getting Connected

To revise the system profile of your PIX-LINK router, you require some primary essentials. An IP is the first, followed by a pair of user credentials. Tracking such data is not tricky. Look for a brand label on the bottom of your router with details printed on it, or you can trace it down in the user manual.

Conclusion

Your PIX-LINK router offers a stress-free installation process that even a non-technical user can perform. But, keeping the network private and secure is every user's primary aim. Your default login credentials are more prone to be traced by any intruder and hence must be set with unpredictable values. Seek expert advice or peek into the user guide for further assistance.

Models using PIXLINK