Router Proware Default Login - Username, Password and IP Address

Detected IP Address For Proware

192.168.1.1 Login Admin
192.168.1.254 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Proware router

A complete data package service with multiple security measures such as LAN encryption, Wi-Fi protect, and advanced firewall protection offered by a Proware router (Example PW-RN501D). With high data speed, your Proware router allows a user to create a flexible network according to the needs. Every user can access the services from an ISP through a static IP based protocol with just one-time access to the admin panel.

Login Process to your Proware

The access to the admin panel of your router will grant all the required permissions to modify the security as well as profile settings with the requirement of an IP and Username/Password combination.

Below steps will guide you with necessities, such as a computer/laptop/smartphone device, the Proware router, and an Ethernet cable or a Wi-Fi network connection.

  1. Unite your Proware router over a wired joint to your network device.
  2. Open the Chrome browser and state the default IP 192.168.1.1 in the address bar of it. You should be guided you to the login user page.
  3. Proceed with the login by stating the default username as admin and default password as admin.
  4. Once through the login, the control settings web interface of the Proware router will appear to you. Begin the set up with first creating new network credentials.

Note: Always remember to note down all the preinstalled settings before changing them along with your login credentials.

What to do if your router stops working after changing configuration

Troubleshooting

Every shortcoming to your router's network or services has one particular solution called default reset. Get into the admin section and revert the changed settings with previously saved values.

Although, if everything fails along with the login access, then use the small reset button on the router's backside or bottom edge to do the job. A quick 20 seconds press and hold is required.

Get Connected

To get in touch with the router, you must be known to some primary details, such as an IP address and Username/Password. Where to get these? Well, your router's kit has a user manual with all the requirements. However, when a user has not received the manual, then look underneath your Proware router for a brand label printed with information.

Conclusion

Your Proware router is compatible with every operating system to be installed. However, setting up the device requires proper assistance formatted above and under the user manual received. Look for help from any trained individual if any problem persists.