Detected IP Address For QPCOM
| 192.168.1.254 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access QPCOM router
A router designed for professional use, either a small organization or a multi-storied housing facility, is your QPCOM router. A key attraction is its small size and high-class Internet services from ISPs around the globe. However, a QPCOM router user needs authenticating itself through an admin login that requires an IP and User credentials. Users can look under the user guide for such data or run through this article.
Login Steps
To begin the setup process, you need some standard requirements, such as a computer with any standard browser installed and your QPCOM router.
After fulfilling these requirements, follow the below-stated steps carefully to access the admin setup.
Step 1: Create a bond between your QPCOM router and your computer device. You can have a wired or wireless link.
Step 2: Launch the web browser and steer to the login web interface by typing the default IP 192.168.10.1 in the address bar.
Step 3: As the login page appears, specify the username and password. When you have granted access to set your login credentials, then use some random values.
Step 4: Executing these steps will confer to the web interface of the admin panel. Adjusting the settings can be performed now.
However, trace all the previously installed settings and your login data carefully before changing them.
What to do if your router stops working after changing configuration
Troubleshooting
When accessing the admin panel gets on your nerves, then using the prior noted login credentials can gain the admin entry. You can then adjust the changed settings with default data to resolve any router related issue. However, when you misremember the login username/password, then the only way to retrieve the router service is through an automatic reset. A button is present at the bottom of your router to perform the act. Press and hold this for 30 seconds that will set your router back as a factory set. Now, use the default username and password to log in.
Get Connected
To set up a connection linking the router and your device, validate first that the router connections. Next, trace the valid IP address and start a network. Find the details required on the base of your router or use the user manual offered.
Conclusion
Ensure that you are always connected with your router while performing any system update. Also, any router related issues can be resolved by resetting the default settings either through a login or using the reset button on the router.