Router TP LINK Default Login - Username, Password and IP Address

Detected IP Address For TP LINK Login Admin Login Admin Login Admin Login Admin Login Admin Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access TP LINK router

A rudimentary Wi-Fi router for all your home needs or a more advanced Wi-Fi router for your complex needs all offerings proves themself worthy by the brand TP-Link. From changing the account information to adding/deleting a network device and even configuring the router requires access to the admin panel. This article covers all the necessary information for your assistance.

To begin, first set up a communication link between the TP-Link router and any of your networking device such as a Computer/Laptop/Smartphone.

Login Steps

To set up your router and network channel, log in is essential to the admin. Follow the below process step-by-step carefully.

Step 1: Connect to a link at first (essential to reach the gateway for your TP-Link router and log in) between your device and router modem.

Step 2: Click-start any suitable web browser installed within your device. Type in the default IP address in the address bar among the list.


Step 3: With the valid TP-Link server opening, a request to present default Username and Password will appear. Refer to the default login credentials underneath your router's surface or try out some of the combinations listed below.

Username: admin/ (blank)/ create in setup

Password: admin/ ttnet/ 2011/ (blank)/ create in setup

What to do if your router stops working after changing configuration


When somehow, your router breaks the link in between, or you are unable to get into the admin setup, then your modem calls for a quick reset operation. Process the same by obeying the steps below.

  1. Turn off your router's power, but do not unplug.
  2. Look underneath the router for a small reset button.
  3. Press and hold the same for 30 seconds with a Pin or any pointed object.
  4. When the lights end flickering, turn the router Off and On again to finish up.

Resetting might end your link sometimes, hence be your last call.

Getting Connected

When in case you forget the provided login details and your gateway address, then you can try to look for several other ways to reconnect. However, if your router is still unresponsive, then you need a replacement from the brand.


Strong login credentials are required to set up and operate your TP-Link router's network. Also, to fix any reported issue, always login to the router's admin and revert the settings with prior knowledge of them. Peek through the user manual or look into this guide for any assistance.

Models using TP LINK