Detected IP Address For Ubee
| 192.168.100.1 | Login Admin |
| 192.168.0.1 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access Ubee router
The Ubee router serves the purpose of dealing with highly demanding multimedia and high-speed requirements. Any Ubee router services grant is with the IP and username/password. Looking for these details in the user manual received or taking the help of the default credentials will allow the login access. But, if you find difficulty with the user manual, then below quick guide will help in login.
How to Login a Ubee router
To reach the control panel of the router, you need to access a login into the router. Having some basic requirements will aid in login.
A system with at least one web browser
Network connection with the router, either wired or wireless.
For login into the router network, follow the below steps.
- Link up your device to a Ubee Router network.
Use a wired or wireless connection to get connected to the Internet link. Preferably use a wired connection to eliminate any interruption in the internet link.
- Use the default IP 192.168.0.1 of the router.
Mention the IP in the address bar of the browser of your choice and click enter.
- The Ubee router login page will open where the username and password are needed to be specified.
- Key in the User name and password with you and click on Login/Enter.
- For the first time user login, you must use the defaults, or else if the login details were changed earlier then, use the changed credentials for login.
- Router's control settings user interface will now be accessed where all the adjustments are possible.
Note: Eventually, always write down all the default settings values in advance before any modifications to them.
What to do if your router stops working after changing configuration
Troubleshoot your router working
If using the login details is not allowing the router services, then you need to reset the router. Do this using the small black button at the backside of the router by pressing the button for 30 seconds to make a hard reset that will bring the settings to the default.
Resetting can also end the internet connection. Always keep a record of the default settings value and revert them when needed.
Getting Connected to Ubee Router
For reaching the login user interface of the router, you can either try the credentials available with you or find help using the commonly used defaults.
Username
Password
user
user
admin
admin
An alternate IP address to reach the router login interface is listed below.
- 192.168.100.1
- 192.168.178.1
Conclusion
Your Ubee router manufacturer is persistent in the advancement of your network experience with high-class security features. However, the consumer end security configuration requires setting up knotty and untraceable user credentials. Seek the help of the above article or go through the user manual once.