Router UPVEL Default Login - Username, Password and IP Address

Detected IP Address For UPVEL

192.168.1.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access UPVEL router

A UPVEL router is introduced to provide superior user experience of Internet access and high-speed user data exchange. This can be achieved with the unique IP address and username/password combination for each user. You can go through the user manual for this detail or take the help from the below is a brief guide to look upon.

Steps to the login of UPVEL router to access setup

To begin with the login process, you must have a system that has web access and also a web browser installed in it.

Below steps will now gain you access to the Web interface of your UPVEL router control panel

  1. Join wireless of a wired connection.

Make an Ethernet cable or Wi-Fi connection to your computer to access the Internet with your router.

  1. Open a web browser and navigate to 192.168.10.1
  2. In UPVEL router login web page specify the username/password

The default username is admin with the password as 1234/admin.

  1. You would now be able to access the control panel user interface.

Recommendation: The default settings must be saved as notes by a user before changing them for future usage.

What to do if your router stops working after changing configuration

UPVEL router still not working

It becomes a very easy task to make any kind of changes in the settings once you get to the web user interface of your router. If you face any trouble while login process, then you might recheck the login credentials used. If the problem persists then you need to reset the router.

A hard reset can be done by pressing and holding the reset button on the router for 30 seconds which will bring back the settings to the defaults.

But make sure that the network connection is not altered while configuring the router.

Getting Connected

When getting connected becomes a nightmare, then locating the valid details such as IP and user credentials is the only way out. Traces to your UPVEL routers specifications are under the user manual. Also, the router presents these values underneath the bottom surface. When not found, get in touch with the brand with your router's make and model name.

Conclusion

In general, if you have the login access to the router admin interface, then you must apply the previously saved settings first before trying the above-mentioned troubleshooting steps. You can also seek some expert advice if needed.

Models using UPVEL