Router Verizon Default Login - Username, Password and IP Address

A router, more often called a modem, is a device that connects a user device with an Internet Service Provider and deals with the data transfer in the communication network. A Verizon router requires a Username/Password, and its IP address to gain service access. These details stated in the user guide produced with the router. Yet if a user has not received the manual or does not want to check the lengthy guide for login details, then this quick guide will help.

Login Guide for Verizon Router

To get to the control settings of your router, follow the below stated steps.

1. Use a wired or wireless connection of your router with your computer.
2. Open an Internet browser available with you (example Internet Explorer, Firefox, Opera or Chrome).
3. Type 192.168.8.1 in the address bar and press the Enter key
4. You will be guided to a login interface with two entries as Username and Password details.
5. Mention the details provided to you and press the Login button.

You now will be directed to your router's control settings user interface, where you can adjust the settings as required.

Note: Bring in mind to pen down all the default setting values well in advance before changing them.

Troubleshooting method

Even after trying as mentioned above, login access denies, then reset the router to get the default settings stored back. Resetting requires pressing the reset button available at the backside of the router for 30 seconds. But, a user must remember that this might interrupt the connection as well.

Getting Connected

If the Login problem persists, then you might have been entering the wrong credentials. You can still gain the login access if you remember the router's model name or ID. However, you can try to use different arrangements of user IDs and Passwords that are commonly used by Verizon routers.

 A router IP address is also required to make changes in the settings. All this information regarding the router finds tracing over the router bottom or backside. Yet, if the router does not have it mentioned, then use the below-mentioned details.

192.168.1.1

192.168.0.1

192.168.0.250

Conclusion

It should be a final step to reset the router. But, if a user can log in, then you must revert the settings with previously saved factory defaults if possible or see for a bit of expert advice.

• LRV5-100
• LVR1