Router Viewsonic Default Login - Username, Password and IP Address

Detected IP Address For Viewsonic Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Viewsonic router

The router helps in the flow of data in the network with two things, a local IP address, and some Username/Password combinations. Any Viewsonic router can also be accessed using its credentials. A user can get these details in the user manual received with the router but, if finding these details is getting difficult for a user, then he can get help from this small guide below.

Viewsonic login methods

Your Viewsonic router settings can be seen and modified only after login. Hence follow bellow steps.

  1. Connect your computer or device with the router's network using an Ethernet cable (recommended) or Wi-Fi.
  2. State in the available web browser and hit the Enter key.
  3. The IP will guide you to the page with some segments as a username and password.
  4. Fill the designated fields with appropriate information and click Login/Enter.

You must specify the login details presented to you with the router. If you have already changed them earlier, then specify those details.

The new window that appears will be the control settings window where you can make the changes as your needs.

Note: keep in mind to note all the default settings before making any changes to it to revert them when required.

What to do if your router stops working after changing configuration

Viewsonic router Troubleshooting

If, even after trying all the above methods, you cannot log in to your Viewsonic router’s admin, then reset the router to set all the default settings again. A reset requires pressing and holding the small button at the bottom or back of the router for 30 seconds. Doing this might also end the internet connection.

Getting Connected

Sometimes using wrong login details may be a reason for not getting to the control setup page. Hence, a user can look for the correct login details on the router's bottom or back. However, if they are missing there, then try some of the alternate options mentioned below.

Username: (Blank)

Password: admin

A router IP address is additionally needed to make changes in the settings. You can try using bellow IPs to reach the router web user interface.

  2. 192.1686.1.2


Your Viewsonic router offers innovative solutions for all kinds of needs. Hence, use reset as your end solution for any testing situation, and if the router login can be accessed, then we must feed all the previous router settings. If still, the problem persists, then seek for any knowledgeable person.

Models using Viewsonic