Router Vikosmo Default Login - Username, Password and IP Address

Detected IP Address For Vikosmo Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Vikosmo router

Setting and creating technological advancements as per the customer interests is what a ViKosmo brand focuses. With the adaption to the prime and daily needs of a user, the brand introduced a high-class router device that couples a user device with an Internet Service Provider and deals with the data transfer in the communication interface. A Vikosmo router wants a Username/Password, and its IP address to gain its setting access. Such presented below.

Login Guide for Vikosmo Router

To get to the control frameworks of your router, follow the below stated steps.

  1. Use a wired Ethernet connection or wireless (Wi-Fi) connection of your router with your computer.
  2. Open an Internet browser available with you (example Internet Explorer, Firefox, Opera or Chrome).
  3. Specify in the address bar and hit the Enter key
  4. Now, appear a web login interface with segments demanding a Username and Password details.
  5. Specify the details presented to you and press the Login button.

You now will be taken to your router's control settings user interface, where you can alter the settings as needed.

Note: Pen down all the default setting values well in advance before changing them. Also, set your default login credentials as soon as you log in.

What to do if your router stops working after changing configuration

Troubleshooting method

Even following all as stated above, login access is not allowed, then reset the router to get the default settings put back. Your ViKosmo router holds a small button to perform a reset operation. Press the button available at the backside of the router for 30 seconds. Nevertheless, a user must remember that this might suspend the connection as well.

Hence, if a user can log in, then it is required to revert the settings with previously saved factory defaults if possible or see for a piece of expert guidance.

Getting Connected

If all the methods have failed your login access, then you need to check whether the credentials used are correct or not. You can look for the valid details over the router base or rear-end stated. However, a router IP address is additionally required to make adjustments in the settings. Below is a default gateway to reach a Vikosmo router login user interface.



Your ViKosmo router embarks the daily essentials and hence needs better firewall protection. With login access, begin configuring the device by setting unpredictable login credentials. Also, it should be the last step to reset the router.

Models using Vikosmo