Router Virgin Media Default Login - Username, Password and IP Address

Detected IP Address For Virgin Media

192.168.0.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Virgin Media router

All the network devices can be connected to the ISP with the aid of a router and hence all the data transfer can be assisted through it. A Virgin Media router is one of the routers that serve the same purpose using an IP address and a unique Username/Password that is shared in the user manual received with the router. A user can also find these details in the below brief guide.

 

Login steps of Virgin Media router to access setup

 

Once the login is allowed, modifications in the router's setting can be performed.

 

For login follow the below steps:

 

  1. Establish a connection with your router either wired or wireless.
  1. Open a web browser of your choice and enter 192.168.0.1 in the address bar.
  1. A login user interface will open with the Username and Password entry fields. Enter it and press Enter/Login.
  1. A Virgin Media router control panel window will open.

 

This is where all the settings are saved and you can now have access to it and make changes as wanted.

Note: Always keep a record of all the previously set default settings with you so that if something goes wrong, it can help for providing a solution.

 

Virgin Media defaults

There is a set of default credentials for a Virgin Media router that is most commonly used by users. A user can use them if the login details are not mentioned over the router's bottom side or if they are forgotten somehow.

Username

Password

                              admin                             

Changeme

admin

randomly generated

 

To get to the Virgin Media web user interface, the most common IP address is stated here.

  1. 192.168.0.1
  2. 192.168.1.1

What to do if your router stops working after changing configuration

Virgin Media router Troubleshooting

If you have attempted all the above-stated ways and still the login has failed, then you can reset the router as well for the final solution. This can be very easily executed by holding the reset button present on the router for 30 seconds. But, the connection will be lost after the reset and hence it is recommended to write down the default settings much before making the changes.

Conclusion

As said, reset must be the final solution when the login fails. Resetting the router will bring the router back to factory settings. Hence it is always advised to take a bit of expert advice.