Router ZERO Default Login - Username, Password and IP Address

Detected IP Address For ZERO

192.168.1.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access ZERO router

To gain access to any of the ZERO router, a user must know the router IP address and Username/Password. This information find traces in the User manual of your ZERO router. But if this manual is not received or the user doesn’t find time to go through the same for finding this login Information, then you can undergo this brief manual below.

Login Steps for ZERO Router

  1. Get yourself connected to a network (by Wi-Fi or Cable) and then log in to any of the web browsers such as Chrome, Firefox, or Internet Explorer.
  2. Mention the ZERO IP 192.168.1.1 in your browser address bar and click Enter.
  3. Directed to the Login page, present the default Username and Password offered by the brand.
  4. State the default Username and Password as admin and move further with the Login process by pressing Enter.

Note: If the Password has been changed by you beforehand, then you must enter that as you login Password but not the default one.

  1. You now will be able to check the routers control panel.

What to do if your router stops working after changing configuration

Troubleshooting

If you are not yet able to login to your router, then there are different methods as well. Can you locate the brand name or your router’s ID? If yes, try some of the known ID and Passwords that are more often used by ZERO routers, such as mentioned below.

If the user IDs and Passwords mentioned on the User Guide don’t work for you, then you can try out these stated below and have access to your router settings.

User Id: admin

Password: 0000

In case if you are unaware of or cannot locate the IP of your router, then you can look for the same at the bottom or over the backside of the modem.

Get Connected

In this case, you would need to reset the modem. An effortless approach to do so is by pressing the small button at the back of the modem or to its one edge and holding it for 30 seconds. This way, your router settings will be set back to its factory mode. But remember that after doing this, your online connection will end abruptly. Hence it is recommended to take expert advice from a knowledgeable person.

Conclusion

A user must keep in mind that if the login to the control panel is active, then the previously recorded settings must be fed online before choosing the reset option for the final solution.

Models using ZERO