Router ZyXEL Default Login - Username, Password and IP Address

Detected IP Address For ZyXEL

192.168.1.1 Login Admin
192.168.10.1 Login Admin
192.168.100.1 Login Admin
192.168.3.1 Login Admin
192.168.0.1 Login Admin
192.168.200.1 Login Admin
192.168.212.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access ZyXEL router

To login to any prototype of ZyXEL Router, you demand a router IP, username & password of your model. You can find this Knowledge and others already mentioned in ZyXEL router manuals. However, if you want to resolve any errors or wants the login procedure, you can follow as below.

Login Guide for ZyXEL Router

  1. Confirm that you have connected to the device correctly.

Offer a wired connection to a network to get through the ZyXEL router setup page.

  1. Steer through your web browser to 192.168.1.1

You must enter the IP address 192.168.1.1 in your web browser address bar. Your ZyXEL router habitually used IP address is this, but you can also go through a list of other IPs for a specific one.

  1. You must head to the login page where you must enter the Username and Password that you have followed by pressing Enter.

What to do if your router stops working after changing configuration

What if nothing works?

Well, these are the best possible remedies to resolve the difficulties. However, if the problem still sticks around, then you can reset the device by pressing the Reset button for approximately 30 seconds. Locate the small key at the back/bottom surface. The modem will get reset to its Factory Settings after this. However, after doing this, your connection will be suspended, and hence if you don’t have enough information, then you must seek expert advice.

Getting connected

All you need first is the right IP address to get through the security settings of your router. You can look for the correct credentials on the rear side of your router as well or in the user manual. However, if these details are not handy with you by any means, then you can try to find your router’s IP by different methods.

You can try a default Username/Password when you find yourself unsure about your IDs such as:

Username: admin

Password: 1234

Some of the routers are approachable through their IP address, but you can also have their access through default URLs such as:

http://myrouter

http://zyxelsetup

Once done, you can now configure your router settings.

Conclusion

The last option should be a reset option to solve any critical issue. But, if the control panel login is within reach, then a user must set back the older settings manually.

Models using ZyXEL