Detected IP Address For AboCom
| 192.168.1.1 | Login Admin |
| 10.10.10.254 | Login Admin |
Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.
How to access AboCom router
The web interface of AboCom router is the control panel for the router & this is where all settings are changed as well as stored. To do modifications in network you will have to login to your AboCom router.
Conditions to access the AboCom web interface
How to Access The setup page and login to an AboCom Setup Page
To access the AboCom web interface is very clear-cut & all you will require is:
- A web browser that you already have
- Accessing to the network either via WiFi or LAN-cable
- AboCom router
Here are the commands to link your AboCom router's interface for diagnostics & configuration.
- Verify you are linked to your AboCom router
To be capable of reaching the setup pages of your AboCom router, you will first need to connect with its network. Hence, just get connected to the network, either via Ethernet cable or via Wi-Fi.
Tip: You may connect to the AboCom router via Ethernet cable, if you don’t remember the Wi-Fi password.
- Login to your web browser & navigate to 192.168.1.254
Write the IP address of the router in the address field by opening your browser. 192.168.1.254 is the most common IP in AboCom routers. You can look for the list of default AboCom IP address for your certain model, if the IP address is not working.
- Write the Username as well as Password for your AboCom router
You can enter the recent username and password and click enter/sign in the password and username field.
What to do if your router stops working after changing configuration
Troubleshooting AboCom router
If you are unsure regarding the username or password, you may go through the default AboCom ID to know the defaults and also how to reset them. The ID are mostly written on the label at the backside of the router. This is it. Now you can configure anything you desire on the device.
Get connected
After you enter the AboCom admin interface you must be able to modify any settings which are obtainable. Be cautious on configuring your router so that you do not break down the network. Suggestion: Keep a note of the present settings prior modifying anything so that revert if you face any issue.
Conclusion
After a configuration change if your AboCom router or stops working If, by mistake you do some changes which break the AboCom home network, you just need to return to zero by following the general hard resetting trick 30 30 30. Usually this is the last alternative, & if you yet have access to the AboCom interface you may anytime login to attempt to revert to the settings initially.