Router Aztech Default Login - Username, Password and IP Address

Detected IP Address For Aztech

192.168.1.1 Login Admin
192.168.2.1 Login Admin
10.0.0.1 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access Aztech router

An Aztech router aid in providing a user with an innovative broadband and networking experience. Such a device aims to be the best companion of any of the network device needs. Features like a unique IP address and an arrangement of username and password support such compatibility. A user can locate this data within the manual received with the router of go through a quick guide below.

Login process of Aztech router

Connect your computer/laptop with an Ethernet cable first, so that, in case of a power shortage, the router does not stop its functioning.

Now follow the below steps to access the Aztech router.

  1. Open a web browser such as Chrome (preferably or whichever is available).
  2. State the IP 192.168.1.1 in the address bar of the browser and click Enter key.

The default IP for an Aztech router is 192.168.1.1 and 192.168.2.1. You can use any of these.

  1. The login user interface will open with fields as Username and Password.

Use the default Username and Password as admin if you are a new user or specify the Username and Password set by you previously.

  1. The next web page you will be directed is the control panel for your router.

All the router default settings stored can be checked and altered from this point. However, before making any changes in them, write all the default setting values with you.

What to do if your router stops working after changing configuration

Aztech router troubleshooting

If the router services have stopped after making the changes or if the login access is denied due to incorrect Password, then recovery your services can only be achieved after the router is reset. This can be done with the generic 30 seconds hard reset option by pressing the reset key present at the router’s base. It will get you back to ground zero and now using the default login credentials will grant you access to the router.

Reset should be the last option but reverting the default settings with prior knowledge must be chosen as a solution.

Get Connected

All the router services are available with a correct IP address and Username/Password combination which many of the users are unaware of. We can look for this detail mentioned on the router’s backside or at its base for login. If missing, then use the router make and model name to get these details.

Conclusion

To protect your connection link from any intruder activity, changing the login Credentials is a must. You must look for on how to modify these credentials in the user guide.