10.0.0.1 IP Address
To access the admin page type 10.0.0.1 into your web browser’s address bar or click on the link below.
Detected IP Address
Local IP Address: 10.0.0.1
Admin Router Login 10.0.0.1
This should be your router admin ip address, depending on your local ip address. This is only the case if your wifi router is on the same network.
Default logins for 10.0.0.1
| IP Address: | 10.0.0.1 |
| Username: | password |
| Password | admin |
| IP Address: | 10.0.0.1 |
| Username: | admin |
| Password | password |
| IP Address: | 10.0.0.1 |
| Username: | admin |
| Password | admin |
| IP Address: | 10.0.0.1 |
| Username: | cusadmin |
| Password | highspeed |
| IP Address: | 10.0.0.1 |
| Username: | Cisco |
| Password | Cisco |
The IP address 10.0.0.1 is unique as it can be used greater than once. It belongs to private IP address of 24-bit block that are used for local area networks (LANs)., it’s not likely to route remote IP addresses via the internet, not like public IP addresses, still that doesn’t make them unusable.
Steps to Log in into 10.0.0.1
There’s a great possibility that you may access it by using the IP address 10.0.0.1, if you have a router at home.
- Just input http://10.0.0.1 in login webpage by opening your favourite web browser. Try https://10.0.0.1 login as an alternative if you find a security warning.
- Recheck that you don’t access the http://10.0.0.0.1 login webpage, which wouldn’t work as 10.0.0.0.1 login webpage do not exist. A login window must show.
- To proceed just input the default admin username as well as password.
Troubleshooting 10.0.0.1
There are 3 key reasons why individuals have difficulty in connecting to 10.0.0.1:
- No direct connection: Most routers can be reached by the IP address 10.0.0.1 for security reasons. A PC is connected directly to with an Ethernet cable. A few routers allow you to alter this behavior, but most don’t. 10.0.0.1
- Incorrect IP address: Even qualified network administrators occasionally write 10.0.0.0.1 rather than 10.0.0.1. Simply bear in mind that all IPv4 IP addresses include just 4 numbers, not 5 or 6 or 10. If you’ve altered the IP address of the router from 10.0.0.1 to anything else still you don’t recall what, we suggest you restore the router to its default settings. On the rear of the router there must be a restore key somewhere.
- Incorrect username & password: For preventing strangers from altering your settings & possibly compromising, the security Routers are protected with a password.
Get Connected
- On the rear or base of the router there must be a tiny hole. You will have to fix something into the hole to click the reset key which is there, like a paperclip.
- After the router plugged in, click & hold the reset key for thirty secs. When you release the key, wait for the router to start, and try to login to the router once more.
- If none of the above works, you may try what is called as a 30-30-30 resetting. Settle in, as you will require holding the reset key for 90 secs. Click & hold the reset key for 30 secs. However continue to hold the reset key, undo the router, wait for 30 secs, and then again plug it back. For another 30 secs hold the reset key.
Conclusion
After you’re in your router’s admin webpage (remember that the 10.0.0.0.1 admin webpage does not exist as it includes one additional zero), you may change several various settings. You may also alter the IP address of the login webpage.