10.0.0.2 IP Address
To access the admin page type 10.0.0.2 into your web browser’s address bar or click on the link below.
Detected IP Address
Local IP Address: 10.0.0.2
Admin Router Login 10.0.0.2
This should be your router admin ip address, depending on your local ip address. This is only the case if your wifi router is on the same network.
Default logins for 10.0.0.2
| IP Address: | 10.0.0.2 |
| Username: | admin |
| Password | admin |
| IP Address: | 10.0.0.2 |
| Username: | admin |
| Password | zoomadsl |
| IP Address: | 10.0.0.2 |
| Username: | zoomadsl |
| Password | admin |
| IP Address: | 10.0.0.2 |
| Username: | admin |
| Password | epicrouter |
IP address 10.0.0.2 is located on various local PC networks, mainly in business networks. Network routers for Business class are allotted 10.0.0.1 as their home gateway address usually is configured to help a subnet with user IP addresses opening at 10.0.0.2.
This similar address is even the local default address for selected makes of local broadband routers such as Siemens, Edimax, Micronet & Zoom.
Login steps 10.0.0.2
- Laptops and other gadgets which support DHCP may automatically obtain their IP address with the router. The router chooses what address to allot from the range to set up to control, is known as the DHCP pool.
- Normally routers will allot these shared addresses in serial order (although the order is not assured). Hence, 10.0.0.2 is most normally the address specified to the former user on a local network which joins to the router founded at 10.0.0.1.
- Business networks lacking flexibility in assigning a huge amount of IP addresses obviously settled to using the network 10.0.0.0 as the default with 10.0.0.2 as one of the foremost addresses allotted from this range.
Troubleshooting 10.0.0.2
Maximum present network gadgets as well as laptops & game consoles, let their IP address to be manually set. This is known as a fixed IP address.
For doing this, "10.0.0.2" must be written in a configuration screen of network setting on the gadget. Now the router has been configured to allot the address to that particular gadget, depending on its real MAC address.
But, just writing the numbers don’t ensure it is an official address for that gadget to use. Also the remote router should be formed to contain 10.0.0.2 in its maintained address range.
Getting connected
Access a router which has been allotted the 10.0.0.2 IP address is as simple as opening the IP address with usual URL by writing http://10.0.0.2.
Maximum networks allot dynamically personal IP addresses such as 10.0.0.2 use of DHCP. Try to allot it to a gadget physically is even doable but not suggested owing to the danger of IP address clashes.
Routers can’t always identify whether a specified address in their pool already has been allotted to a user manually prior automatically allocating it. In the worst situation, two dissimilar gadgets in the network will both be allotted 10.0.0.2, causing in failed connecting problems for both.
Conclusion
The 10.0.0.2 IP address is a remote IP address, mostly used for business purposes. Version 4 Internet Protocol defines some sets of IP addresses as limited for remote use, means they cannot be used in web servers or additional internet hosts. The foremost of such private IP address range start with 10.0.0.0.