Router USROBOTICS Default Login - Username, Password and IP Address

Detected IP Address For USROBOTICS

192.168.2.1 Login Admin
192.168.123.254 Login Admin
192.168.1.1 Login Admin
192.168.0.100 Login Admin

Based on your local IP address, this should be your router admin IP address. This is only the case if you are in the same network as your wifi router.

How to access USROBOTICS router

An USRobotics router is a versatile device that supports high-speed internet access with a super stable connection. With the router’s IP and username/password, all the services are accessible. The User guide must have this information. However, if it misses them, this brief guide will help you.

Login Steps for USRobotics Router

A web interface of your router find the way with the following requirements:

A computer system with a web browser and Internet access.

To connect to a web interface of your router, you need to follow the below commands.

  1. Get your system connected to the router’s network.

Establish an Internet connection with the router, either using a Wi-Fi or Cable.

  1. State the IP 192.168.2.1 in your browsers address bar and click Enter.

Open a web browser and navigate to one of the default IPs of a USRobotics router.

  1. A login user interface with two fields as Username and Password will open.

State the default Username and Password as admin and press Enter.

Note: If the password was already changed previously then, you should provide that as your login Password but not the default one.

  1. You now will be able to check the routers control panel.

Always make sure to record all the default settings before forcing any changes into it.

What to do if your router stops working after changing configuration

Nothing has worked for you from above!

If using the defaults is not granting you the login to the router, then the final remedy to your problem is to reset the router. It is a quick process. A tiny button at the router’s base is what you need to press and hold for approximately 30 seconds to reset it. Your USRobotics router will be set back to its default settings, yet this may end the connection.

Try these modes if above login methods are not working

 

When the details in the user guide are not worthy granting you login, then you need to try some of the default credentials, often used for a USRobotics router login access.

User Id

Password

admin

blank

blank

admin

admin

admin

 

The login username and passwords tracked on the router are what a user can use to login. But, when they are missing, then defaults would help in gaining the router login.

With the username/password, an IP address is also needed at first to get to the USRobotics user login interface.

  1. 192.168.2.1
  2. 192.168.123.254
  3. 192.168.0.100

Conclusion

A user must keep in mind that if the login to the control panel is active, then the previously recorded settings must be fed online before choosing the reset option for the final solution.