How to Improve Your Wi-Fi Signal
In recent times, sluggish Wi-Fi is greater than just annoying. You could be working from home-based & have to make crucial Skype calls. Or possibly you just desire watching a show on Netflix without shielding. In any case, you shouldn’t need to opt for poor Wi-Fi. To enhance your Wi-Fi signal there are quite a lot of ways, so you may get speedy connectivity right through your home.
Carry out a Wi-Fi Speed Test
Earlier you start tampering by your router or by updating your hardware, you have to carry out an immediate speed test to check how speedy your Wi-Fi indeed is. You may effortlessly do this on your PC or smartphone just visit HelloTech.com/Speed & click Go.
When you get results of your speed test, just evaluate them with your internet plan. If the upload & download speeds are very lower than what you actually pay for, therefore something could be slowing down the WiFi speed. Though, it is essential to note that maximum internet service providers like Cox, Comcast, and Charter, broadcast downloads speed which you won’t know how to do under usual circumstances.
If you need to know on how to perform a Wi-Fi speed test & what your speed test result means, have a look at the info below.
Reboot Your Modem & Router
The initial thing you must do if your Wi-Fi connection reduces speed is to reboot the modem & router. Reboot the modem/router resets your connection, that can immediately improve your Wi-Fi signal.
By unplugging your modem & router for sixty seconds you can effortlessly reboot. Still, this will alter the IP addresses of your attached devices, that means you possibly will have to reconnecting them to the Wi-Fi network after that.
Relocating the Router’s Antennas
If the router has modifiable antennas, you should not place them all straight up & down. A Wi-Fi signal emits outward from the aerials; therefore, you can enhance the signal by facing them in diverse directions.
A past Apple WiFi engineer Alf Watt says you must point your aerials, so they are upright to each other. In a talk with Mac Observer, Watt even says that specific tools, like few MacBooks, horizontally get WiFi signals, although others get vertically WiFi signals.
Placing your router’s aerials upright to each other can even help if you stay in a multi-story house. This approach, you will include one floor by the horizontal signal, & the remaining floors can be covered through the vertical signal.
You should even position your router’s aerials at an angle of 45-60-degrees, pointing in reverse directions. If you have greater than 2 antennas, you must stretch them all out in several directions.
Shift Your Router
As your router transmits Wi-Fi signals out in every direction, you must position it in a midway location to get the top signal all over your house. Wi-Fi signals even get absorbed thru walls; hence you must position the router out in the open.
By positioning the router in an uplifted position, you may even enhance your Wi-Fi signal. But you desire to prevent positioning your router beside any metal pieces for instance fridge. This is since Wi-Fi signals try to rebound metal surfaces rather than surpassing through them. You must even prevent positioning the router beside a pool, a fish tank, or tub since water absorbs Wi-Fi signals.
To learn more on the suitable position to place the Wi-Fi router, read below.
Think of a Strong Wi-Fi Passkey
With a strong Wi-Fi passkey keeps the neighbours from thieving your Wi-Fi & hogging up all the bandwidth. If you have a weak Wi-Fi passkey or an open network, hackers may even crack your network & take your personal info, like your bank info.
To make your Wi-Fi network protected, you may login to your router to alter the default username & passkeys of the Wi-Fi networks. If you’re unsure how to do this, have a look at the guide on how to login to the router & alter its passkey.
Modify the Router Security Settings
Once you login into the router, you may even improve your Wi-Fi signal by altering the security settings. If the router provides you the option, you must use WPA2 (Wi-Fi Protection Access 2) safekeeping. Or else, you may use WPA.
Revising the security settings into WPA2 will in fact double or triple the Wi-Fi speeds, specifically if you have been utilising WEP (Wired Equal Privacy) safety. WPA2 is the speediest of the encryption protocols, whereas WEP is sluggish.
To discover more on how to set the Wi-Fi security protocols, investigate the details below.
With the Frequency Band 5 GHz
If you own a router of dual band, you may use the 5 GHz or 2.4 GHz (gigahertz) frequency bands. Such bands all have their own Wi-Fi network names & passkeys. By default, maximum routers identify these networks with a 2 or a 5 towards the end of their names.
By the 2.4 GHz band, you will get a poor Wi-Fi signal which has a long range. Therefore, this band must be kept for devices which are distant from the router. It is even the top band to use for tools which do not use up ample bandwidth, for instance smart household devices.
By the 5 GHz band, you will receive a strong Wi-Fi signal with a short range. With this band will promptly improve your Wi-Fi signal, still it even means you will have to be nearer to the router to get a great Wi-Fi signal.
Whereas it could be alluring to use the 5 GHz band on each of your devices, which may slow the Wi-Fi down. To obtain the top signal, you must just use the 5GHz band with some devices at the same time. Later switch all the other devices on to the 2.4 GHz band. This manner, all the devices will not be opposing for traffic on the similar band. If you desire to know more on the differences on 2.4 GHz & 5 GHz, check out for details.